Test Bench EUI/EUP CAM-BOX

Technical specification

1.Supply voltage: 220V

2.Lift range of cambox:  14, 15, 16, 18mm

3.Width adjustable range: 100—3000µs

4.Advanced angle adjustable range: 0—30℃

Main function

1.     EUI/EUP tester consists of one cambox, controller and specific accessories.

2.     The tester can be used on the injection pump test bench with the controller and accessories.

3.     With the signal from the controller, the test bench will drive the cambox. 

        The EUI/EUP will inject and the injected flow will go through the high pressure pipes to the 

        injectors, then to the fuel controller.Then can judge the status of the EUI/EUP.