-
Test bench
- Test Bench MTR12PSDW
- Test Bench MTR600
- Test Bench MTR700
- Common Rail Test Bench MTR815
- Common Rail Test Bench MTR8719
- Common Rail Injector Tester MTR9180
- Common Rail Injector Tester MTR9200
- Test Bench EUI/EUP CAM-BOX
- Test Bench MTR HEUI
- Common Rail Test Bench MTR300
- Common Rail Test Bench MTR500 Standard injectorTest bench toolsInjector tester
- Injector tester MTR PS400
- Injector tester MTR PS600
- Servo controlled nozzles tester MTR PD400
- Common rail injector tester MTR CR1000
Standard injector
Detail
| Model | Type | BOSCH NO. | Apply |
| shaft needle type | ISO7440 A14-17.2 | 0 681 343 009 | Ⅰ/Ⅱ/B/A |
| ISO7440 A14-14.7 | 1 688 901 000 | A/I B/Z/VE/IW | |
| orifice-plate type | ISO7440 A44-20.7 | 1 688 901 015 | |
| ISO7440 A54-20.7 | 1 688 901 016 | ||
| ISO7440 A64-20.7 | 1 688 901 017 | ||
| ISO7440 A74-20.7 | 1 688 901 018 | ||
| ISO7440 A84-20.7 | 1 688 901 019 | ||
| ISO7440 A64-17.2 | 1 688 901 020 | ||
| low-inertia and orifice-plate type | ISO7440 B64-20.7 | 1 688 901 101 | PW/PB/PN/PW2000 P7/P7100 BQ/IW/PL/PM |
| ISO7440 B64-25 | 1 688 901 102 | ||
| ISO7440 B74-20.7 | 1 688 901 103 | ||
| ISO7440 B74-25 | 1 688 901 104 | ||
| ISO7440 B84-20.7 | 1 688 901 105 | ||
| ISO7440 B84-25 | 1 688 901 106 | ||
| ISO7440 B54-20.7 | 1 688 901 109 | ||
| ISO7440 B54-25 | 1 688 901 110 |
1. All Standard injectors are produced according to international standards ISO7440.
2. Shaft needle type Standard injector use the standard nozzle DN12SD12, this nozzles are produced according to
ISO4010 standards, applicable for the oil feeding capacity≤150mm each Cycle.
All names, numbers, symbols and descriptions are for reference purposes only, and do not imply that any part is the product of these manufacturers.
Copyright © 2017 Wuxi HighBright Int'l Co., Ltd All Rights Reserved 苏ICP备08021463号-3